Tensioning Device

Tensioner is used to hold goods in place during transportation, movement, shipment or storage. They have locked, will not fall off, safe and reliable, light, easy to operate, protect objects from damage. It is to strengthen the steel template and compression board equipment, mainly play a tightening role.

Composed of tensioning device main body and tensioning lever, described the front end of the tensioning device main body is equipped with the cutting device, cutting device and tensioning device main body as stated fixed connection, described to cut off the device is also used to control cutting device to cut off the device handle, described in the cutting device and cutting device for fixed connection handle described tensioning device main body has a package in the middle of the belt groove, The central inner cavity of the tensioner body is provided with a tensioner gear, the fixing groove of the packing belt and the tensioner gear are coaxial and connected with the tensioner body through the bearing, the two sides of the tensioner gear are provided with a pair of symmetrical handle fixing plate, any handle fixing plate and the tensioner body is fixed connection, Any stated at the top of the handle fixed plate via bolts and tighten connection handle activities, referred to the bottom of the tensioning lever and tighten gear meshing, described in the tensioning device main body in the middle of the pack with a fixed groove on the right side of belt, also has described with supporting and tensioning device main body for the same connection, take her outside the place described has used for pressure packing belt grooved, pressure grooved and described with supporting for the active connection, One side of the pressure belt groove is provided with a pressure belt groove handle for lifting the pressure belt groove, the pressure belt groove handle and the pressure belt groove is fixedly connected, the bottom of the middle position of the tensioner body and the bottom of the right end are provided with a non-slip support plate, any anti-slip support plate and the tensioner body is fixedly connected. The packing belt fixing groove is composed of four fan-shaped blocks of the same size. The top end of the tightening handle is provided with an anti-slip sleeve.The material of the non-slip sleeve is rubber.

Product Specification